male setting up camp fire on mountain to

SHOP ALL

CUSTOMIZE YOUR SOLAR SYSTEM 

Often, our customers have a special need for a custom Solar Power Application. If you don't find what you like or need, we can customize a system to fit your needs. We encourage you to email us, call, or fill out our contact form for customized solar systems.

*Ordering outside of the United States, please call before checking out.

*Systems that weigh 150 pounds, or more, must be shipped via Freight, and cannot be ordered directly from the website. For such systems, please call 770-639-2244 so that freight costs may be calculated.

Space Warmer

SKU 12V-SW
$99.00
In stock
1
Product Details

This is the most durable and longest lasting small space warmer available, is built by hand in the USA, provides instant warmth, operates from 12-volts DC only, and can be used with our medium and larger portable solar power systems. Any electronic device that creates heat, especially those that are used to heat a room and/or boil water, consume a large amount of energy. In an off-grid situation, one cannot afford to consume a large amount of energy. We chose to couple this space warmer with our portable solar power systems because of its quality and relatively lower power draw. The warmer has 2 settings, low and high. On the low setting, the first of two identical heating elements will operate at approximately 11 amps/120-130 watts. On the high setting, both heating elements will operate at approximately 22 amps/240-260 watts. This warmer is designed to provide an amount of heat that will raise the temperature in a small room, a small tent, or a deer stand/shelter, and will take the edge off of the cold. Since the device draws power from a portable battery, the higher the power draw, the shorter the length of time that the battery pack will last. One may benefit from a small amount of heat for a longer time, or from a larger amount of heat for a shorter time, and one should not expect this warmer to heat up a space from cold to warm when there is limited stored energy.

This warmer is built by hand in the USA using only the very best parts, motors, and wire, and are designed to last the user a lifetime. The housing is constructed of vinyl clad aircraft aluminum which is riveted together. This warmer will work in any application where there is a source of 12-volt DC power, including cars, trucks, vans, busses, heavy equipment, or any outdoor or off-grid circumstance. This is not your average space heater, but offers the ultimate in durability and reliability, and it excels in the harshest of environments.

The newly designed brushless fan has proven to work well along with sensitive electronics that are found in some of todays' equipment, and it has proven to have very little EMI noise when tested on a scope. The newly designed fan and motor assembly, proprietary vacuum sealed heating element, and vibration dampeners are featured in the brushless warmer. This space warmer is the perfect choice for the user who requires reliable INSTANT warmth in just a few minutes. There are no water lines to run, no fittings to install, no corroded core to worry about down the road, and, most importantly, INSTANT WARMTH with no warm up time! This warmer features proprietary heating elements that have been tested to have a life expectancy of 10,000 hours, that are vacuum sealed, that operate at temperatures in excess of 650 degrees, and that are up to 300% more efficient than standard alloy heater elements. It is simple to set up, connect to our portable solar power systems, and simple to operate in minutes. Measuring only 6 x 5 x 4 inches, the warmer will fit in virtually any small space, and is easy to pack.

Special features and basic specs include:

a.Brushless 50,000-hour Ball Bearing Fan

b. 10,000-Hour Vacuum-Sealed Heating Elements.

c. Case Construction: Riveted T5052 Aircraft Aluminum.

d. Wired Entirely with GXL Wire

e. Thermally Protected

f. HIGH HEAT, LOW HEAT, and OFF Settings

g. Comes complete with fuse-protected connector-cable that is used to connect the heater to the power system

h. 3674 BTU's

Brushless fan specs and features include ball bearings, 12-volt DC, 0.3 amps, 3.6 watts, 3900 rpm, 52 cfm of air movement, pressure of 6.731, and noise production of 40 db measured at 1 meter from the intake of the warmer.


Save this product for later
 

     Powerenz, Inc. accepts payments via PayPal, credit cards via PayPal, cashier's/bank checks, USPS money orders, bank wire transfers, company checks, and personal checks.  Payment by check must "clear" before any system leaves our shop. 

Thank you.

*Ordering outside of the United States, please call before checking out.

*Systems that weigh 150 pounds, or more, must be shipped via Freight, and cannot be ordered directly from the website. For such systems, please call 770 639 2244 so that freight costs may be calculated.