Our Portable Solar Powered LED Lamp is designed to meet one's needs during emergencies, prepper situations, off-grid work, rural household needs, camping, and outdoor activities. It is manufactured in Germany and is equipped with a LED and excellent charging technology. Its flared housing conceals multiple functions as a ceiling-mounted lamp, a portable, hand-held lamp, and a USB charger (for cell phones, MP3 players, and others), all in a single device. Charging is flexible: the unit can be powered by solar modules, batteries, or AC adapters. The integrated highly-efficient MPPT charge controller speeds the charging process, extends battery lifespan, and provides light for up to 55 hours depending on which light intensity setting is chosen. The robust housing is sealed against water (IP65), dust, soil, moisture, and insects, and it is shock resistant which protects the inner electronics from malfunctions.

A key feature of this LED Lamp is that its internal battery pack may be recharged from three sources: solar modules that produce 7 – 25 volts; a 12-volt car battery; or, an included AC adapter. Additional features include the following: innovative soft touch capacitive switches that are completely sealed, protected against corrosion, and that eliminate moving internal parts; high environmental protection (IP65) against dust, soil and other climate influences; USB output to charge USB devices e.g. mobile phones, MP3 players, etc.; high-power LED with three adjustable light levels for best comfort; a phosphorescent soft ring around the lamp that allows the lamp to be located easily in the dark; an external remote switching option that allows one to operate the lamp from up to a distance of 10 feet; a blinking red LED battery status indicator that works both when charging and when in use; and automatic reduction of the lighting level when batteries are running down. This LED Lamp has no moving parts thanks to capacitive switches, thus eliminating conventional switch failures, one of the most common reasons for the breakdown of small solar-powered systems.

Batteries – Nickel Metal Hydride x 4, 6-volt (four rechargeable, replaceable AA in 4S configuration; 2.1 amp-hour charge capacity; low self discharge)

Full discharge – charge cycles - >500 depending on the average depth of discharge

Light Intensity – 120 lumens on high setting

Light spectrum/color – 3950 – 4300 K

LED – rated to operate > 50,000 hours

Duration of light – 3 settings: low (20 lumens) = 55 hours; medium (50 lumens) = 16.5 hours; high (120 lumens) = 5.5 hours

DC Charging Input – Solar: VMPP > 7VDC; Voc < 25VDC; max charge current = 1.5 amps @ 7VDC; or 12-volt battery; max charge current = 0.8 amps

Barrel connector for DC input = 5.5 x 2.5 mm

Operating ambient temperature range = minus 20 – plus 50 degrees C.

Solar charge controller technology = MPPT

Time to charge via 12-volt battery or AC adapter = 2.5 hours

Time to recharge a mobile phone via USB port = approximately 2 hours

Positioning/fastening/hanging device = steel hoop with 7 notches for positioning in 45-degree steps

Weight = 1.26 pounds

Dimensions = 11.65 x 6.1 inches

Waterproof rating = IP65

USB Charge port data: output voltage = 4.4 – 5.1VDC; nominal output current = 750 mA; overload and short circuit protection; type of port = Type A; can be used to operate/recharge a variety of USB-charged devices

The LED Lamp comes with the following:

a. LED Lamp,

b.4 rechargeable NiMH batteries (internal and removable),

c. barrel connector wire lead with soldered ends to connect to a solar panel or 6 to 12 volt battery terminals,

d. lanyard,

e. 115-volt AC grid charging adapter,

f. male cigarette plug car adapter,

g. set of USB mobile phone charging connectors,

h. remote USB on/off switch with 10 feet of cable, and

i. directions