Powerenz LiPo 16 - 20W

Product Details:
In Stock
Product Code: LiPo16-20W


$489.00

X







Powerenz LiPo 16 - 20W

     In the photo below, one can see the water-resistant portable solar power system case with its lid open, the built-in 20-watt foldable solar panel, and the control panel with its waterproof safety cover opened and showing the AC, DC and USB outlets.

     This water-resistant system will deliver a maximum of 96 watts/8 amps of power/current via one 12-volt cigarette lighter socket, 120 watts of continuous 120-volt/60 Hz power until the battery runs out of energy, and is best suited to provide power for small and medium size portable electronics, including laptops, communication radios, battery chargers, media players, iPhones/Pads, Tablets, small power tools, energy-efficient lights, etc.  If the power draw of your electronic device is 60 watts, the battery will last approximately 2.5 hours in the absence of incoming solar power before it needs to be recharged.  The preferred maximum current draw from the cigarette lighter socket is 5-8 amps (96 watts max) to prevent excessive generation of heat, though it will deliver up to 13 amps.  If the current draw from the cigarette lighter socket exceeds 13 amps, power delivery will automatically shut down, then re-set itself once the load has been disconnected.  If the power draw on the inverter exceeds 150 watts, the overload protection function will automatically shut off power until the load has been disconnected.  The cigarette lighter socket and the AC outlet may be used simultaneously.  The battery, solar charge controller, inverter, control panel, LED light and switch, operational LCD display screen, master power ON-OFF switch, and 20-watt fold out solar panel are built into and enclosed in a water-resistant (IP65) and dust-proof hard case.  

     Powerenz LiPo 16 - 20W comes with: Battery: 16 amp-hour (177.6 watt-hour) lithium polymer unit The current/power from the battery is limited to 16 amps/177.6 watts.  To maintain the battery pack, please recharge it every 3-4 months until it is completely charged, and do not allow the digital state-of-charge indicator to drop to 0%.   Solar Charge Controller: 10-amp unit.  Solar panel: one CE, ROHS, and PSE-certified, monocrystalline 20-watt/18-volt folding unit that will require 16 hours of peak sunlight to completely recharge the battery from empty to full, and that is built into the hard caseAC-powered battery charger: 3-amp "smart" unit that is built into the hard case, and that operates via North American 120 volts AC.  To charge the battery via a standard North American AC receptacle, included is one extension-connector cable that plugs directly into the control panel.  Inverter: continuous 120-watt (momentary peak 150-watt) pure sine wave unit.  Control panel: encloses one 3-prong AC outlet (120 watts), one AC-charging port, one 12-volt DC cigarette lighter socket (5-8 amps), two 12-volt DC 5.5 x 2.1 mm power plug ports (3 amps each), one 5.5 x 2.1 mm solar power input port that will accomodate an extra solar panel that produces up to 4 amps, a pair of standard Type A USB ports, and ON-OFF switches for AC and DC power outputs.  The maximum combined/simultaneous output from the cigarette lighter socket and the two 12-volt DC power plug ports is 13 amps.  The control panel has a water-resistant safety cover that opens and closes via a pair of turn knobs.  Case: water-resistant (IP65) and dust-proof hard case in either olive drab green or dark charcoal grey/black that has a heavy-duty carrying handle, and that measures 15.75 x 12.21 x 4.14 inches in external dimensions.  LED: one 3-watt LED light that is located on one side of the hard case, that is controlled by an ON-OFF button that is located on top of the hard case, and that can be set to flash, remain illuminated, or be off.  LCD display: "intelligent" display system that indicates battery charge capacity indicator, charging status, errors, and AC and DC power output status.  USB: one pair of standard Type A USB charge ports, the combined output current of which is 2 amps.

     The system weighs 12.5 pounds.

 

In the two photos below, one can see the portable and water-resistant solar power system case standing on the ground outdoors.

In the two photos below, one can see the portable and water-resistant solar power system case standing on the ground outdoors, and showing the water-resistant control panel safety cover and the main power ON-OFF switch just above the control panel cover.  The control panel cover may be opened by turning the two knobs.

In the two photos below, one can see that the water-resistant cover of the control panel has been opened exposing the AC, DC and USB outlets, and the AC charging port.  The main power ON-OFF switch can be seen just above the opened control panel.

In the photo below, one can see the 3-watt LED light that is located on the side of the case opposite the side that houses the control panel.  The LED has an ON-OFF button on the top of the case.

In the photo below, one can see the top surface of the portable solar power system case, the carrying handle, the digital LCD display screen that indicates the operation of the system and that includes a "fuel gauge" for the battery, the green ON-OFF button that controls the LED light on the side of the case, and the two clasps that secure the lid of the case.

In the three photos below, one can see the lid of the case being opened and exposing the built-in 20-watt monocrystalline foldable solar panel that recharges the internal lithium polymer battery.

 In the photo below, one can see the AC power extension cable that is used to recharge the internal battery via an AC wall outlet, and that plugs directly into the control panel.

In the photo below, one can see that the portable and water-resistant solar power system comes in two colors, dark grey and military green/olive drab.